User Tools

Site Tools


VPN Client Setup

VPN Policies

VPN Setup Directions

The VPN system uses the 'Cisco AnyConnect' client.

To install the Cisco AnyConnect, follow the directions below: * Navigate to the VPN home page:

You should arrive at the Cisco SSL VPN Service page.


  • Leave the 'Group' as the default option; bsuvpn.
  • Authenticate with your BroncoWeb credentials.
  • Read and accept the Computer Usage Policy by clicking continue.
  • You will be prompted to download the Cisco AnyConnect VPN Client.
  • Download and install the software.
  • Please note that this installation might temporarily interrupt your active network session.

Once installed, the Any Connect software will be available in your programs menu.

One can connect to the respective VPN on/off campus environments by changing the 'Connect to:' URL Upon launching the client.

  • If on campus Connect to:
  • If off campus Connect to:

32-bit Windows OS

Follow instructions for using VPN client on 32-bit Windows (XP).

MAC Users

In OS X, after installing the Cisco Anyconnect SSL VPN client, use:

Finder > Applications > Cisco > Cisco AnyConnect VPN Client

It will prompt for your BroncoWeb username and password.

Testing Server Connectivity

You can test your connectivity to the AMS servers by pinging as shown in the figure below.

If you are not able to reach at least one of the {ams1, ams2} servers, then there is some issue in your VPN setup or internet connectivity.

Notify the course TA if you believe that either of the ams1 or ams2 servers are down.

vpn_client.txt · Last modified: 2016/09/17 15:16 (external edit)